-

 Fillets and sanding is done.  Now to lay some fiberglass.  I started at the bow and proceeded aft.



Comments

Post a Comment

Popular posts from this blog

Back to work...

-
Image
A few projects, a trip to Minnesota and some summer sailing has kept me too busy to work on the boat, but I was able to spend some time on it today. Since the last post I managed to get conduit installed.  I also installed a drainplug in bulkheads 1 and 8.   Today I installed the floorboards.  I made these from western red cedar and covered them with 5 coats of varnish.  I think they look good!
Read more

Varnishing the floorboards...

-
Image
 This is a nice milestone for me.  I milled my floorboards from a pair of large western cedar planks.  That was a fun job made easier by having access to a full woodworking shop equipped with a large bandsaw for resawing the planks into smaller boards and large jointer and planer to finish them to size.   It took some head scratching but I finally was able to get a pretty fair curve on the boards.  Now I'm ready to varnish. I started by putting a layer of epoxy on all surfaces of the boards.  Cedar is a pretty soft wood and the epoxy has hardened it up nicely. For varnish, I'm planning to apply several coats of Epifanes.  At this point I'[m using the high gloss but may decide to use the satin as the last coat. Space is at a premium so I came up with the idea to string wire between the cradle arms to hold the long boards while they dry.  I also made to smaller stands to support the smaller boards.  This has worked out great.  
Read more
-
Image
 I milled up a pile of western cedar boards for use as the cabin sole.  It's mostly knot free and the knots I have are small-ish.   Here is the port side roughed in.    
Read more